Click image to view full size image
Spiral Wound Gasket SUNWELL SW600
spiral woundgasket is formed of V-shaped metallic strip and soft non-metallicfiller. Support rings, inside and Outside the spiral, improve thegasket's handing, fitting and Versatility.
Depend on its excellent compression resilience, it is suitable forsealing spots where the alteration of temperature and pressure arefrequent.
Types:
SW600-R BasicType Basic constructiontype, inner and outer diameters are reinforced with several pilesof metal without filler to give greater stability and bettercompression characteristics. - Suitable for tongue and groove, maleand female or grooved to flat face flange assemblies. |
|
SW600-IR InnerRing Type Solid inner metalring acts as a compression stopper. To prevent accumulation ofsolids, reduce turbulent flow of process fluids and minimizeerosion, damages of gasket between flange bore and the insidediameter, the annular space is filled up by solid inner metal ring.- Suitable for male and female pipe flanges. |
|
SW600-CG Outer RingType Solid outer ringaccurately locates the gasket on the flange face to give theadditional radial strength to prevent the gasket blowout and actsas a compression limiter. In case of installing the outer ring, itis very easy to install the gasket to flange face because the endof outer ring will touch at bolts - Suitable for use with flat faceand raised face flanges. For class 900 and above an internal ringis recommended. |
|
SW600-CGI Inner & Outer RingsType A innerring and outer ring type gasket will give an additional compressionlimiting stopper for gasket inner and outer side. It will preventthe corrosions on flange face at annular space. - Suitable for usewith flat face and raised face flanges and specified for highpressure / temperature service - Class 900 and above or wherecorrosive or toxic media are present. |
|
TypicalApplications
Pipe, valve, pump, thermal exchange, condensing tower, plain holeand man hole of flange, etc.
Petrochemical, chemical, mechanical manufacturer, power station,metallurgy, shipbuilding, medical and pharmaceutical unclear powerstation and navigation, etc.
PrimeFeatures
> Gasket are made in a wide variety of sizes and shapes.
> Combinations of metal strip and filler are selected to suitthe specific fluid media and operating conditions.
> Quick to install and remove
> Make gaskets suitable for high pipeline pressure on flat orraised flange faces.
> Temperatures from cryogenic up to 1000 °C
Specifications
> Products are manufactured in accordance with all relevantgasket standards to suit flange designations: ASME B 16.20, ASME B16.5, BS1560, ASME B 16.47 A (B), BS EN 1092, DIN, JIS, and NF,etc.
> Color cord as ASME B 16.20 on request.
Supply Spiral Wound Gasket,Asme Spiral Wound Gasket
