Click image to view full size image
Graphite packing with carbon fiber corners is a multi-fiber packing, braided from expanded graphite yarns and carbon fibers, the diagonally braided from graphite yarn, reinforced in all four corners with carbon fibers. The corners and body make the packing three times more resistant to extrusion and increase the pressure handing capabilities compared to traditional graphite packings.
SUNWELL P403I
There are multi inconel wires reinforced to create the packing with increased extrusion resistance capability.
Typical Application
> It can be used in many demanding applications, both dynamic and static
> Particularly suited for high temperature and high pressure service in valves, pumps, expansion joints, mixers and agitators of pulp and paper, power station and chemical plant etc.
Prime Features
> More resistant to extrusion
> Increase the pressure handing capabilities.
Technical Data
| Material | 100% Expanded Graphite Yarn |
| Temperature Range | -200 up to +555 oC atmosphere; -200 up to +650oC in Steam |
| Process | |
| Rotating | 3 Mpa |
| Reciprocating | 10 Mpa |
| Valves | 28 Mpa |
| Shaft Speed | 18m/s in rotary |
| PH | 0~14 |
| Density | 1.5 g/cm3 |
Graphite Packing with Carbon Fiber Corners
