Click image to view full size image
Graphite Sheet reinforced with metal mesh is made of expanded flexible graphite SUNWELL B201, reinforced by a metal mesh of SS304 or SS316 or CS, graphite content of more than 98%, the density is 1.0g/cm
Typical Application
> Made for various gaskets
> Suitable for petrochemical, mining, vessels, boilers, piping and duct, pumps and valves, flanges
Prime Features
>Lone life and less maintenance
> Replacement for asbestos, new more applications are being indentified daily.
> Excellent comprehensive properties
>Good compressibility and resilience, small stress relaxation, fine compensation function
> Permanently elastic, even in hot-cold cycles over the entire temperature range, no aging, no brittleness, no hot or cold flow.
| Tolerance of density g/cm3 | +/-0.06 | +/-0.05 |
| Carbon content >/= % | 98/99 | 99.5 |
| Tensile strength >/= Mpa | 3~20 | 5~25 |
| Compressibility >/= % | 30 | 30 |
| Recovery >=/ % | 15 | 15 |
| Sulphur content </= % | 1200 | 700 |
| Chlorine content </= % | 50 | 25 |
| Stress relaxation rate % | 10 | 10 |
| Lgnition loss </= % | 2.0 | 0.5 |
Temperature: -240~+550°C under oxidizing environment
Graphite Sheet with Metal Mesh
